VECTOR_SYSTEM

Project details

VECTOR SYSTEM
LED

Mountings: 
– Surface mounted fitting
– Suspended fitting

– Built-in fitting

Light emission: 
direct
symmetric
Body:
– in extruded aluminium, painted with SOLVENT-FREE, white, black, grey or other colours upon request, epoxy polyester powders, thermosetting at 180°C, after phosphate treatment;
– Removable gear tray on which the wiring components are mounted;
– Cap in die-cast aluminium.
Optical device: 
Diffuser in opal polycarbonate.
Due to thermal expansion, the opal diffuser should be 1 mm shorter for each meter of the extrusion’s length.
Light source: 
LED
CRI ≥80 Ra
• 3000K – 4320lm – 36,4W – 119 lm/W

• 4000K – 4480lm – 36,4W – 124 lm/W

• 3000K – 5400lm – 45,5W – 119 lm/W
• 4000K – 5920lm – 45,5W – 124 lm/W
Wiring:
class I
driver 0,84-1,5A 36V 120-277V.
Feeding 220~240 V / 50-60 Hz.
Performance data:
• Protection level IP20
Marks:
CE
Regulations:
CEI EN 60598-1
CEI 34-21
CEI EN 60598-2-2
EN 62031
Photobiological safety of lamps and lamp system:
CEI EN 62471
IEC/TR 62471-2
Directives:
2006/95/CE
2004/108/CE
VERSIONS UPON REQUEST
• dimmable electronic ballast
• DALI dimmable electronic ballast (if possible)